Operating Systems > C-lab (ST)

c-lab creator v1.3 (1988) for ATARI ST *cracked*

<< < (2/4) > >>

Mixermap:
Those Radio Shack PCs look really cool with the 5 1/4 drives!
in UK we had cheap Amstrad PCs but monitors had non-standard connectors because the PSU of the whole system was.....inside the monitor! :D

So the cannot be used nowadays with a TFT.

End of "Off Topic" Topic :)))

Mixermap:
BTW
Here are the extracted files from the above disk image.

Format a 720KB floppy IN A PC (Win 7, 8 and 10 cannot format a floppy at 720KB)
The floppy must be a DD disk NOT a 1.44 HD one.
Copy the files in the ZIP to the floppy.
Put the floppy in your Atari
Run "1_LOADER.PRG"
(if you have any C-Lab dongles you can run the uncracked "CREATOR.PRG")
These files will work fine on an UltraSatan SD hard drive.

chrisNova777:
so wait - are you saying the cracked program wont run without a dongle of some sort attached?
but it doesnt have to be a notator dongle?

isnt the whole pt of a crack to make it so people can use the software without a dongle !! lol
i still dont have an atari or else i would try myself

Mixermap:
Sorry, what I wrote was a bit confusing.

There are two ways of running this version.

- To trigger the crack and use it WITHOUT dongle you must run it from the "1_LOADER.PRG" file which activates the crack. Apparently the crack works as a dongle emulator in memory.

- If you do have a dongle for ANY version of Creator / Notator then you can run "CREATOR.PRG" instead, which will trigger the UNCRACKED version which may be more stable.

That's quite handy :)

chrisNova777:
ok that makes alot more sense - thank u for clarifying!
i need an atari!

Navigation

[0] Message Index

[#] Next page

[*] Previous page