Recent | Who | Artists | Firewire | USB | Gfx | Windows | Mac | MacOS9 | IBM/DOS | ATARI ST | Midi Interfaces | Sequencers | MPCs | Roland "MC" | Roland "S" | E-mu | Ensoniq | Akai "S" | Samplers | soft-Samplers | Synths | soft-Synths (VSTi) | Roland "JV" | Modules | Drums | Tape | Mixers | hardware Effects | soft Effects | Midi Controllers | iOS | android | sw Timeline | Hackintosh This site exists to archive historical + crucial information related to computer assisted music production and related technologies; with the hopes of becoming a community of creatives who might make a significant intellectual contribution towards enhancing the quality of music production of both our generation and the next;  thanks for being here, and thank you for contributing. remember the past,  appreciate the present, and plan 4 the FUTURE >>>

Author Topic: Roland PG-10 (1988)  (Read 2416 times)

0 Members and 1 Guest are viewing this topic.

Offline chrisNova777

  • Administrator
  • Posts: 8907
  • Gender: Male
  • "Vintage MIDI Sequencing + Audio Production"
    • www.oldschooldaw.com | vintage audio production software + hardware info
Roland PG-10 (1988)
« on: February 09, 2019, 10:18:25 PM »

http://cdn.roland.com/assets/media/pdf/PG-10_OM.pdf
Roland PG-10 Midi Controller For D-10, D-20, D110, & Many More
he PG-10 Programmer is designed for use with D-5, D-10, D-20, D-110 and GR-50
https://www.roland.com/us/support/knowledge_base/201939269/

« Last Edit: February 09, 2019, 10:19:17 PM by chrisNova777 »

Offline chrisNova777

  • Administrator
  • Posts: 8907
  • Gender: Male
  • "Vintage MIDI Sequencing + Audio Production"
    • www.oldschooldaw.com | vintage audio production software + hardware info
Re: Roland PG-10 (1988)
« Reply #1 on: September 29, 2020, 06:49:48 PM »
original power supply details

ac 120v 60Hz 8W out: DC 9v 200mA

center negative
outside positive

(the polarity noted on the PG-10 unit is the same of course, center negative, outside positive)

Offline chrisNova777

  • Administrator
  • Posts: 8907
  • Gender: Male
  • "Vintage MIDI Sequencing + Audio Production"
    • www.oldschooldaw.com | vintage audio production software + hardware info
Re: Roland PG-10 (1988)
« Reply #2 on: September 29, 2020, 06:58:43 PM »
i believe this is a new version of the old psa-120 adapter, renamed to the psa-120T

AC 120V 60Hz 9W
OUT: DC 9.6V 200mA

center negative
outside positive
(negative or reverse polarity)

Offline chrisNova777

  • Administrator
  • Posts: 8907
  • Gender: Male
  • "Vintage MIDI Sequencing + Audio Production"
    • www.oldschooldaw.com | vintage audio production software + hardware info
Re: Roland PG-10 (1988)
« Reply #3 on: September 29, 2020, 07:02:41 PM »
thers also a PSA-120S model now
https://www.boss.info/ca/products/psa_series/
https://www.sweetwater.com/store/detail/PSA120S--roland-psa-120s-power-supply

Quote
500 mA of current to easily power multiple pedals, even digital ones
Power cable length is increased to almost 10 feet
LED indicator for quick visual verification of on/off status
New design which does not cover adjacent power outlets

*photo: PSA-120S/120 V type

Quote
Get the right BOSS Power Supply!
The Roland/BOSS PSA-120 adapter converts AC wall current to 9 volts DC current. If you want to save money on batteries and ensure stable performance gig after gig, the BOSS PSA-120 adapter is the recommended power supply unit for products including many BOSS compact pedals, the DB-66/88 metronomes, FC-Series foot controllers, MC-202, SH-101, SP-202, TR-626, and all TU-Series tuners. Capable of powering any BOSS effect pedal, the Roland/BOSS PSA-120 can also power equipment with digital circuitry.

Roland/BOSS PSA-120 Features
Capable of powering any BOSS effect pedal, including those with digital circuitry.
Converts AC wall current to 9 volts DC current. Power supply designed to operate a multitude of BOSS and Roland products.
Regulated with a higher milliamp rating for use with digital equipment.
Output: DC9V (regulated), 500mA
Tip negative, sleeve positive
3-meter cable
Status light that flashes if there are grounding problems
Small footprint (similar to a cell phone charger)
For consistent effects pedal performance night after night, gig after gig, choose the Roland/BOSS PSA-120 AC adapter!
Tech Specs
Type:   Roland/Boss Power Supply
Output Amps:   500mA
Output Voltage:   9V DC
Sleeve/Tip Configuration:   Sleeve: Positive, Center: Negative
Manufacturer Part Number:   PSA-120S2