oldschooldaw.com

Hardware => Synthesizers + Romplers => Synth Programmers & Accessories => Topic started by: chrisNova777 on February 09, 2019, 10:18:25 PM

Title: Roland PG-10 (1988)
Post by: chrisNova777 on February 09, 2019, 10:18:25 PM
(http://www.oldschooldaw.com/forums/index.php?action=dlattach;topic=6170.0;attach=7467;image)
http://cdn.roland.com/assets/media/pdf/PG-10_OM.pdf
Roland PG-10 Midi Controller For D-10, D-20, D110, & Many More
he PG-10 Programmer is designed for use with D-5, D-10, D-20, D-110 and GR-50
https://www.roland.com/us/support/knowledge_base/201939269/

Title: Re: Roland PG-10 (1988)
Post by: chrisNova777 on September 29, 2020, 06:49:48 PM
original power supply details

ac 120v 60Hz 8W out: DC 9v 200mA

center negative
outside positive

(the polarity noted on the PG-10 unit is the same of course, center negative, outside positive)
Title: Re: Roland PG-10 (1988)
Post by: chrisNova777 on September 29, 2020, 06:58:43 PM
i believe this is a new version of the old psa-120 adapter, renamed to the psa-120T

AC 120V 60Hz 9W
OUT: DC 9.6V 200mA

center negative
outside positive
(negative or reverse polarity)
Title: Re: Roland PG-10 (1988)
Post by: chrisNova777 on September 29, 2020, 07:02:41 PM
thers also a PSA-120S model now
https://www.boss.info/ca/products/psa_series/
https://www.sweetwater.com/store/detail/PSA120S--roland-psa-120s-power-supply

Quote
500 mA of current to easily power multiple pedals, even digital ones
Power cable length is increased to almost 10 feet
LED indicator for quick visual verification of on/off status
New design which does not cover adjacent power outlets

*photo: PSA-120S/120 V type

Quote
Get the right BOSS Power Supply!
The Roland/BOSS PSA-120 adapter converts AC wall current to 9 volts DC current. If you want to save money on batteries and ensure stable performance gig after gig, the BOSS PSA-120 adapter is the recommended power supply unit for products including many BOSS compact pedals, the DB-66/88 metronomes, FC-Series foot controllers, MC-202, SH-101, SP-202, TR-626, and all TU-Series tuners. Capable of powering any BOSS effect pedal, the Roland/BOSS PSA-120 can also power equipment with digital circuitry.

Roland/BOSS PSA-120 Features
Capable of powering any BOSS effect pedal, including those with digital circuitry.
Converts AC wall current to 9 volts DC current. Power supply designed to operate a multitude of BOSS and Roland products.
Regulated with a higher milliamp rating for use with digital equipment.
Output: DC9V (regulated), 500mA
Tip negative, sleeve positive
3-meter cable
Status light that flashes if there are grounding problems
Small footprint (similar to a cell phone charger)
For consistent effects pedal performance night after night, gig after gig, choose the Roland/BOSS PSA-120 AC adapter!
Tech Specs
Type:   Roland/Boss Power Supply
Output Amps:   500mA
Output Voltage:   9V DC
Sleeve/Tip Configuration:   Sleeve: Positive, Center: Negative
Manufacturer Part Number:   PSA-120S2