oldschooldaw.com

Software => Vintage Software => Topic started by: chrisNova777 on December 16, 2014, 10:59:45 PM

Title: Sample Vision DOS (May 1993) for use with TRUE Mpu-401 or SoundBlaster MIDI port
Post by: chrisNova777 on December 16, 2014, 10:59:45 PM

(http://www.muzines.co.uk/images_mag/articles/mt/MT_89_03_turtle_beach_2_full.jpg)
http://vetusware.com/download/Sample%20Vision%202.01/?id=9053
http://www.muzines.co.uk/articles/turtle-beach-softworks-sample-vision/2203

see this thread: http://www.oldschooldaw.com/forums/index.php?topic=2387.0

   Sample Vision is a DOS utility that manipulates sound samples stored in MIDI controlled samplers from the early 1990s for example Ensoniq EPS, Kurzweil K2000, etc. It is designed to use a MPU-401 compatible interface, however there is a work around that allows use of the standard sound blaster midi port by accessing the MIDIPORT utility on the first disk and typing "MIDIPORT MPU 1 1 5 20 20 330" before running Sample Vision.

Title: Re: Sample Vision DOS (May 1993) for use with TRUE Mpu-401 or SoundBlaster MIDI port
Post by: cryptRomancer on May 31, 2019, 01:17:32 PM

WHOA!! I missed the FFT browser first time. I will most likely get this going again in a VM. Do a few youtubes.

Title: Re: Sample Vision DOS (May 1993) for use with TRUE Mpu-401 or SoundBlaster MIDI port
Post by: chrisNova777 on June 02, 2019, 05:28:08 AM

in a VM? no point. unless hardware integration works somehow in a VM?