oldschooldaw.com

Software => Vintage Software => Emagic Logic => Topic started by: chrisNova777 on September 02, 2014, 08:24:17 AM

Title: Emagic Logic Audio v4.0 platinum (Aug 1999) (Windows 98+ or System 7.6.1+)
Post by: chrisNova777 on September 02, 2014, 08:24:17 AM
(http://www.oldschooldaw.com/forums/index.php?action=dlattach;topic=6189.0;attach=7709;image)
reccommended for use with a pentium II cpu, or a G3 processor

Quote
Trying to install logic audio 4.0 on windows 95 is not possible.. the installer will error out, you must use windows 98 or higher
(http://web.archive.org/web/20000304210912/http://www.emagic.de/english/media/img/screens/lap/editors_b.jpg)
http://web.archive.org/web/19991010010734/http://www.emagic.de/english/products/logicline/lap.html
http://web.archive.org/web/20000302122528/http://emagic.de/english/products/logicline/lap4.html

Quote
   
Quote
System Requirements Windows

    Pentium 200
    Windows 98
    64 MB RAM
    MME compatible sound card

Recommended:

    Pentium II
    128 MB RAM
    Hard disk for audio files only
    Digital audio card
    MIDI interface

Quote
System Requirements Mac

    Power Macintosh (120 MHz or better)
    System 7.6.1 (or newer)
    64 MB RAM

Recommended:

    G3 processor
    128 MB RAM
    Hard disk for audio files only
    Digital audio card
    MIDI interface

System Requirements Hard Disk

    Transfer rate >3 MB/s
    Average access time <10 ms
    Sufficient capacity (approx. 5 MB/track minute)
    With IDE-drives the CD-ROM drive should use the other channel
    UW-SCSI-Controller suggested for external hard drives

 
        

Hardware Support

The multiple hardware support in Logic Audio Platinum 4.0 allows the simultaneous use of different types of audio hardware in one computer - e.g. a combination of two Audiowerk8 and a Sonorus Stud I/O. At the moment, the following digital audio hardware is supported:

Mac and Windows:

    Audiowerk2
    Audiowerk8 (max. 3)
    ASIO (e.g. Lexicon Studio, MotU 2408)
    Yamaha DSP Factory

Mac only:

    TDM (Digidesign ProTools II, III, 24 and 24 MIX including all TDM-Plug-Ins)
    DAE (Digidesign AudioMedia II/III, Session8, ProTools Project)
    Direct I/O (Digidesign hardware)
    Yamaha CBX-Serie
    AV (Sound Manager)
    Korg 1212 I/O
    Sonorus Stud I/O (direct hardware support, ASIO-driver not required)
    AKAI DR8/16 (no sample editing, only graphic editing of audio regions in the Arrange window)

Windows only:

    AV (multi-channel and stereo-MME-soundcards)
Title: logic 4.0 requirements
Post by: chrisNova777 on February 20, 2017, 03:48:34 AM
logic audio platinum 4.0 requirements
logic 4.0 requirements

http://dlia.ir/Scientific/Magazines/SoundandMusic/Sound.On.Sound.Magazine.Sound.Music/1999/logic%204-aug99.pdf

http://www.audiotechnology.com/PDF/7/AT7_Emagic_Logic_Audio_v4.pdf
https://web.archive.org/web/20150606120035/http://www.soundonsound.com/sos/aug99/articles/logic4.htm
"The Audio side of the program includes new drivers, covering more hardware devices, including 24-bit/96kHz systems, and is now also fully ASIO-compliant."