Recent | Online | Vintage | Modern | Win | Mac  OS9 | DOS | Amiga | Atari ST | Graphics | Midi io | Sequencers | Roland "MC" | E-mu | Ensoniq | Akai MPCs | Samplers | Akai "S" | Roland "S"Synths | VST Samplers | VST Synths | Roland "JV" | Modules | Drums | Mixers | Timeline | HackintoshArtists | Graphics

Welcome to Oldschooldaw.com! (Online since 2014) proudly SSL-FREE! and serving vintage computers worldwide! if you are human, Register & Login to gain more access to all boards here; Some guest permissions have been limited to reduce traffic from bots and encourage registration.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - chrisNova777

2
https://www.partition-magic-manager.com/partition-magic/partition-magic-help/UnderstandingTheBIOS1024CylinderLimit.php

any partition size larger than 8GB has a potential problem... as far as DOS use goes...

Quote
If you have such a computer system and you use only DOS, neither the DOS FDISK utility nor PartitionMagic lets you see cylinders beyond the 1,024th cylinder or include them in any partition. Space beyond the 1,024th cylinder always remains invisible.

Quote
The BIOS 1024 cylinder limitation exists because the start and end cylinder values in the partition table (and some BIOSs) have a maximum value of 1024. Because some operating systems such as DOS 6.22 use the CHS (Cylinder, Head, and Sector) values to address sectors on the disk, they cannot access sectors beyond the 1024 cylinder. When you start your computer the BIOS boots the operating system using the CHS values to locate the first sector of the bootable partition. If the partition starts past the 1024 cylinder, the BIOS may not be able to boot it because it cannot address a cylinder number higher than 1024.

With PartitionMagic, you can safely partition any drive, regardless of the number of cylinders on the drive. In fact, to prevent you from performing partition operations that might cause problems, PartitionMagic is careful to observe the BIOS 1,024 cylinder limit on computer systems where one or more of the following applies:

1.The hard disk has a capacity 504 MB or more and the BIOS translation mode is set to Normal or CHS.
2. The hard disk has a capacity 504 MB or more and the BIOS was manufactured prior to 1994 (approximately).
3. The hard disk has a capacity 8 GB or more.

If you have such a computer system and you use only DOS, neither the DOS FDISK utility nor PartitionMagic lets you see cylinders beyond the 1,024th cylinder or include them in any partition. Space beyond the 1,024th cylinder always remains invisible.
Even if the BIOS 1,024 cylinder limit applies to your system, you can use PartitionMagic without difficulty. The only instance where you may encounter a problem is if all the following criteria apply:
4. You use DOS and another OS.
5. The other OS can "see" and use disk space past the first 1,024 cylinders on the disk.
6. You use PartitionMagic or the FDISK utility of the other OS to create a partition extending beyond the 1,024th cylinder.
7. You then run the DOS PartitionMagic executable.
When you run the DOS PartitionMagic executable, you may or may not be able to see the newly created partition that extends beyond the 1,024 cylinder limit. Even if you can see the partition, you cannot use the DOS PartitionMagic executable to perform any operations on that partition. This restriction applies to both primary and extended partitions that contain space beyond the 1,024th cylinder. If an extended partition exceeds the cylinder limit, you cannot perform operations on any one of the contained logical partitions, even if the logical partition itself does not extend past the 1,024th cylinder.
The disk map in the PartitionMagic main window displays an arrow indicator at the 1024 cylinder boundary (and the 2 GB boot boundary), so you can see where your partitions are located relative to the 1024 cylinder limit. Be sure that all OS partitions on a disk start prior to cylinder 1024. This ensures that you can boot the OS. Also, use caution when moving a bootable partition; if the partition is moved beyond cylinder 1024 it may no longer be bootable. To fix this problem you can move the partition below the 1024 cylinder marker.

Tips
1. If you use DOS, but your system has the INT 13 BIOS extensions, PartitionMagic lets you see cylinders past the normal 1,024 limit and perform operations on partitions extending beyond this boundary. https://en.wikipedia.org/wiki/INT_13H

4
Windows 10 (July 2015) / windows 10 release build info
« on: Today at 11:15:47 AM »
https://learn.microsoft.com/en-us/windows/release-health/release-information

22H2 is still current since 2022-10-18 (October 2022)

10
General / Miscellaneous / REGISTRATION IS CLOSED
« on: April 02, 2024, 05:17:17 PM »
no more new members will be accepted for the time being.

if you arent happy with that too bad, you can Thank the idiot russians who are bombarding my site with their BULLSHIT.

if you want to register on the site you will have to email me personally
chrisnova777 at gmail.com

11
Steinberg Cubase / steinberg ELC bug fixes
« on: February 23, 2024, 10:30:08 AM »
eLicenser Control Release Notes

http://www.eLicenser.net

eLicenser Control Version 6.2.0.15056

Build Date

Mac/Win   2011-04-04

New Features

Mac/Win   eLicenser Control:   eLCC has a new API for website access.
Mac/Win   eLicenser Control:   eLCC has new menu entries in help menu
               to visit eLicenser web site and to
               download latest version of eLC.
Mac/Win   eLicenser Control:   In eLCC, the name of a license’s vendor
               is displayed beneath the license name.
Mac/Win   eLicenser Control:   License Database updated.


Bug Fixes

Mac/Win   eLicenser Control:   Fixed wrong icon in eLCC's Validate
               License Usage Period process
Mac/Win   eLicenser Control:   Fixed a bug related to the handling of
version information for Soft-eLicenser data.
Mac/Win   eLicenser Control:   Fixed erroneous handling of high values for
sublimitations of date limited licenses.

eLicenser Control Version 6.1.4.1055

Build Date

Mac/Win   2011-03-22

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.4.1053

Build Date

Mac/Win   2011-03-02

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.4.1052

Build Date

Mac/Win   2011-02-21

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.4.1051

Build Date

Mac/Win   2011-02-09

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.4.1050

Build Date

Mac/Win   2011-01-31

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.4.1049

Build Date

Mac/Win   2011-01-10

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.4.1048

Build Date

Mac/Win   2010-12-13

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.4.1047

Build Date

Mac/Win   2010-12-06

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.1.4.1046

Build Date

Mac/Win   2010-11-30

Bug Fixes

Mac/Win   eLicenser Control:   Fixed incorrect handling of local soft licenses.

eLicenser Control Version 6.1.3.1046

Build Date

Mac/Win   2010-11-23

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.3.1045

Build Date

Mac/Win   2010-11-19

New Features

Mac/Win   eLicenser Control:   License Database updated.

Bug Fixes

Win      eLicenser Control:   Fixed a bug that caused some buttons to be
               inaccessible when eLCC was started with in-
               creased DPI settings.

Known Issues

Win      eLicenser Control:   The alignment of buttons and texts may be
               erratic in some dialogues.

eLicenser Control Version 6.1.2.4044

Build Date

Mac/Win   2010-11-08

New Features

Mac/Win   eLicenser Control:   License Database updated.

Bug Fixes

Mac      eLicenser Control:   Fixed a bug that caused top level menu items
               to be shown in English independently from the
               language settings.

eLicenser Control Version 6.1.1.11043

Build Date

Mac/Win   2010-10-25

New Features

Mac/Win   eLicenser Control:   License Database updated.

Known Issues

Win      eLicenser Control:   No texts are shown when language is set to
               Turkish or Azeri (Latin).
Mac      eLicenser Control:   Top level menu items are shown in English
               independently from the language settings.

eLicenser Control Version 6.1.1.11042

Build Date

Mac/Win   2010-10-11

New Features

Mac/Win   eLicenser Control:   License Database updated.

eLicenser Control Version 6.1.1.11041

Build Date

Mac/Win   2010-09-27

New Features

Mac/Win   eLicenser Control:   License Database updated.

Bug Fixes

Win      eLicenser Control:   Improved “Guided Activation” start up time.
Mac/Win   eLicenser Control:   Fixed minor issues with text and button layout
               in different languages.

Known Issues

Win      eLicenser Control:   Some buttons may be inaccessible when
               started with high DPI settings.

eLicenser Control Version 6.1.0.3039

Build Date

Mac/Win   2010-09-08

New Features

Mac/Win   eLicenser Control:   License Database updated.

Known Issues

Mac/Win   eLicenser Control:   Minor text and button layout issues in different
               languages.


eLicenser Control Version 6.1.0.3036

Build Date

Mac/Win   2010-09-02

New Features

Mac/Win   eLicenser Control:   A new wizard to guide the user conveniently
               through the process of activating a license has
               been introduced.
Mac/Win   eLicenser Control:   Licenses can be activated or transferred even
               if a pending license is present on an involved
               eLicenser.
Mac/Win   eLicenser Control:   Messages given by the eLicenser License
               Server are  completely localized in the
               following six languages: English, German,
               French, Spanish, Italian, Japanese.
Mac/Win   eLicenser Control:   About screen of eLicenser Control Center has
               been updated with current developer list.
Mac/Win   Installer:      End User License Agreement (EULA) has
               been updated.
Win      Installer:      New parameter /n to suppress the message
               that a newer version is already installed on the
               system has been introduced.
Mac      Installer:      Uninstaller is included in the installer dmg.
Mac      Installer:      Support for Mac OS X 10.3.9 and 10.4 has
               been discontinued.
Mac/Win   Utilities API:      A new API allowing to query for possible
               licenses on attached eLicensers for a given
               product has been introduced.

Bug Fixes

Win      eLicenser Control:   Fixed that certain texts were truncated.
Mac/Win   eLicenser Control:   Fixed that generic error messages from the
               eLicenser License Server were displayed
               instead of available localized variants.
Mac/Win   eLicenser Control:   Fixed wrong file extension and differing file
               name of support log file. Also the content of the
               file has been adjusted.
Mac/Win   eLicenser Control:   Fixed misleading translations.
Mac/Win   eLicenser Control:   Fixed differing order of components in eLCC
               About screen.
Mac/Win   eLicenser Control:   Fixed incorrect memory handling.
Mac/Win   eLicenser Control:   Fixed an issue that caused warnings about
               expiring licenses to be shown erroneously.
Win      Installer:      Fixed an issue that prevented the installation to
               complete because 32 bit operating systems
               were erroneously  recognized as 64 bit
               operating systems.
Win      Installer:      Fixed that the version information displayed in
               the eLCC's title was not installed correctly
               under all circumstances.
Win      Installer:      The error message appearing when a newer
               version of the  eLicenser Control was already
               installed has been replaced by a notification
               message.

eLicenser Control Version 6.0.2.7036

Build Date

Mac/Win   2010-08-26

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7034

Build Date

Mac/Win   2010-08-17

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7033

Build Date

Mac/Win   2010-08-12

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7032

Build Date

Mac/Win   2010-07-15

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7031

Build Date

Mac/Win   2010-07-01

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7030

Build Date

Mac/Win   2010-06-17

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7029

Build Date

Mac/Win   2010-06-03

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7028

Build Date

Mac/Win   2010-05-21

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7027

Build Date

Mac/Win   2010-05-11

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7026

Build Date

Mac/Win   2010-05-07

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7025

Build Date

Mac/Win   2010-04-22

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7024

Build Date

Mac/Win   2010-04-09

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7023

Build Date

Mac/Win   2010-04-08

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7022

Build Date

Mac/Win   2010-03-25

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7021

Build Date

Mac/Win   2010-03-12

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7020

Build Date

Mac/Win   2010-03-12

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7019

Build Date

Mac/Win   2010-03-02

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7018

Build Date

Mac/Win   2010-03-02

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7017

Build Date

Mac/Win   2010-02-12

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7016

Build Date

Mac/Win   2010-02-11

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7015

Build Date

Mac/Win   2010-02-08

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7014

Build Date

Mac/Win   2010-02-04

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7013

Build Date

Mac/Win   2010-02-02

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7012

Build Date

Mac/Win   2010-01-28

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7011

Build Date

Mac/Win   2010-01-21

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7010

Build Date

Mac/Win   2009-12-14

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7008

Build Date

Mac/Win   2009-12-08

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7007

Build Date

Mac/Win   2009-12-03

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7006

Build Date

Mac/Win   2009-11-23

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7005

Build Date

Mac/Win   2009-11-05

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7004

Build Date

Mac/Win   2009-10-26

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7003

Build Date

Mac/Win   2009-10-14

New Features

Mac/Win   eLicenser Control:   License Database updated.


eLicenser Control Version 6.0.2.7002

Build Date

Mac/Win   2009-09-24

New Features

Mac/Win   eLicenser Control:   License Database updated.

Bug Fixes

Mac      eLicenser Control:   Fixed an issue which crashed eLCC on Mac
               OS X 10.6.x 'Snow Leopard'.


eLicenser Control Version 6.0.2.6001

Build Date

Mac/Win   2009-09-21

New Features

This eLicenser Control (eLC) update introduces a new eLC version format:
<major release>.<minor release>.<patch level>.<build number + eLD state>

- The first three numbers indicate the version: <major release>.<minor release>.<patch level>.
   - For eLC '6.0.2.6001', the version number is '6.0.2'.
- The fourth number’s first digit indicates the build number: <build number ...>.
   - For eLC '6.0.2.6001', the build number is '6'.
- The fourth number’s last three digits indicate the state of the eLicenser License Database (eLD): <... eLD state>.
   -  For eLC '6.0.2.6001', the eLD state is '001'.


Bug Fixes

Win      eLicenser Control:   Fixed an eLCC issue for copying the Soft-
               eLicenser’s serial number into the clipboard.
Mac      eLicenser Control:   Fixed an issue for accessing older USB-
               eLicensers on older systems  (on Mac OS X
               10.3.9 'Panther' and on Mac OS X 10.4.x
               'Tiger' only).
Win      Installer:      Fixed a problem for returning error codes
               during the installation process.
Win      Installer:      Fixed a problem which prevented further
               updates of the eLC .


eLicenser Control Version 6.0.1.8

Build Date

Mac/Win   2009-09-07

New Features

Mac/Win   eLicenser Control:   Rebranded for "eLicenser" product.
Mac/Win   eLicenser Control:   Completely rewritten eLicenser Control Center
               GUI with Drag and Drop functionality.
Mac/Win   eLicenser Control:   Support for English, French, German, Italian,
               Japanese and localizations.
Mac/Win   eLicenser Control:   Restructured file locations of all components.
Mac/Win   eLicenser Control:   License Database updated.
Mac/Win   Installer:      Rebranded for "eLicenser" product.
Mac      Installer:      Support for English, French, German, Italian,
               Japanese and Spanish localizations.

Bug Fixes

Mac/Win   DCP:         Fixed Digital Content Protection issue where
               some host/plug-in configurations couldn't
               correctly access the same protected .
Mac/Win   eLicenser Control:   Many minor improvements and bug fixes.

14
General / Miscellaneous / REWIRE - last apps to support rewire
« on: February 17, 2024, 10:23:31 PM »
https://en.wikipedia.org/wiki/ReWire_(software_protocol)
https://help.ableton.com/hc/en-us/articles/360003996780-Enabling-ReWire-in-other-DAWs#cubase


Quote
Live 8 supported on Intel® Mac with Mac OS X 10.4.11 (10.5 or later recommended) to 10.9 (with Live 8.4.2)
Live 9 is supported on Intel® Mac with Mac OS X 10.7 - MacOS 10.13
Live 10  (Live 11 does not support Rewire)
Live 10 is supported on macOS El Capitan 10.11.6 through macOS 14 Sonoma.
Live 10.1.43 is fully compatible with Windows 11 to Windows 7 (SP 1- 64-bit).

Reason 9 June 21 2016
https://www.reasonstudios.com/press/260-propellerhead-releases-reason-9-music-production-software
Reason 10 (Reason 11 does not support Rewire)
https://www.reasonstudios.com/press/267-propellerhead-announces-reason-10
-Windows 7 or later (64-bit) Mac OS X 10.7 or later (64-bit)


Cubase 11 (Cubase 12 does not support Rewire)

Cubase 10.0   November 15, 2018
Cubase 9     December 7, 2016


Pro tools 6.1+ spports rewire but i cant find out the last version before it was removed
https://support.source-elements.com/source-connect/sc-troubleshooting-rewire

Studio One v4.6.2 ?
feel free to add to the list

16
Code: [Select]
chrome.exe --ignore-certificate-errors
if you run the .exe for the browser from the "run" commnad and issue the switch "--ignore-certificate-errors" you can use your browser again!

this works to get chrome 49.0.2623.112 working on windows XP!!!!!!
you can edit the shortcut on your desktop to point to "C:\Program Files\Google\Chrome\Application\chrome.exe" --ignore-certificate-errors
simply adding the command line switch after the brackets that point to the .exe file

17
was just watching the demosong play and i thought id post the info from the demo song off the logic audio 5 cd
Quote

New Automation                                                                                                                                                                                     
                                                                                                                                                                                                                                                        -  All-new, ultra-high 32 Bit resolution, track-based automation engine                                                                                                                                                 
-  Automation of virtually all parameters including effect plugs-ins and audio instruments                                                                                                           
-  Automation independent of sequencer record status and track selection                                                                                                                                               
-  Standard automation modes such as read, write, touch and latch                                                                                                                                               
-  Automated parameters are displayed with full names and values                                                                                                                                               
-  Color-coded automation data displayed directly in Arrange window as envelope with nodes (anchor points)                                                                       
-  Automation data can be freely drawn, edited and scaled between nodes in various curves, including convex,                                                                     
    concave, s-form or linear                                                                                                                                                                                                                             
-  Automation data, entire sections, and nodes, can be moved or copied with corresponding audio data, or independently                                                                       
-  Powerful multifunction tool to graphically edit automation envelopes at various zoom levels

Audio Functionality Enhancements                                                                                                                                                 
                                                                                                                                                                                                                                                                                               
-  32 Bit fader resolution                                                                                                                                                                                                                         
-  High-end Dithering with POW-r algorithm                                                                                                                                                                                     
-  Support for 24 Bit/96 kHz audio hardware throughout the Logic 5 Series                                                                                                                                                 
-  The enhanced audio engine allows up to 192 stereo tracks using multiple audio hardware                                                                                                             
    and up to 96 stereo tracks using single  audio hardware                                                                                                                                                                                   
-  Up to 32 audio instruments                                                                                                                                                                                                                       
-  Sidechain capability for effect plug-ins and instruments                                                                                                                                                                                   
-  Hardware-independent audio scrubbing                                                                                                                                                                                   
-  Support for the optional new ES2 and EVOC20                                                                                                                                                                                   
-  TDM support optimizations

New Integrated Software Synthesizers                                                                                                                                                                                     
                                                                                                                                                                                                                                                                                                                                                                       
-  ES M - Emagic Synthesizer  Mono                                                                                                                                                                                                                                                                                  -  ES M - Emagic Synthesizer  Mono                                                                                                                                                                                         
-  ES P - Emagic Synthesizer  Poly                                                                                                                                                                                                               
-  ES E - Emagic Synthesizer  Ensemble                                                                                                                                                                                                                                                                                -  ES E - Emagic Synthesizer  Ensemble                                                                                                                                                                                   
                                                                                                                                                                                                                                                                             
These are punchy, easy to use, analog-style synthesizers based on Emagic's own renowned synthesizer           
technology. All are optimized for specific types of sounds, and operate at exceptionally low processor loads.

New Plug-Ins for Mastering and Sound Design                                                                                                                                                                                     
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       
* MultiBand Compressor                                                                                                                                                                                                                                                                             
* Stereo Spread   
* Denoiser   
* Exciter
* Limiter 
* Adaptive Limiter
* DeEsser
* Phase Distortion 
* Clip Distortion                                                                                                                                                                                                                                                                             
* SubBass   
* Tremolo

Sequencing Enhancements                                                                                                                                                     
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         
-  Optimized HyperDraw                                                                                                                                                                     
                                                                                                                                                                                                                                                         
-  Parameters of effect plug-ins and software instruments can be addressed via                                                                                                                   
    a virtually unlimited number of MIDI controllers   

Score Editor Enhancements                                                                                                                                                                       
                                                                                                                                                                                                                                                         
-  Note typewriter: Onscreen piano keyboard, for extremely fast step-time note input from the computer keyboard or mouse.                                                                                                                                                                       
    Notes can also be played in realtime.                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                         
-  Multi Page View for simultaneous display of multiple pages. Automatically adjusts to fit the current screen size                                                                                                                                                                       
    with respect to selected zoom levels                                                                                                                                                                                                                                                         
                                                                                                                                                                                                                                                         
-  Ability to colour notes reflecting velocity, pitch and voice assignment                                                                                                                                                                     
                                                                                                                                                                                                                                                         
-  Generation of notation from aliases     

New File Format Support                                                                                                                                                     
                                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                   
-  REX2.0 support, to import Propellerhead Software's REX2.0 format files directly into                                                           
   the Arrange window or EXS24                                                                                                                                             
                                                                                                                                                                                                                                                   
-  Support of Digidesign's OMF file format                                                                                                                                                                                       
                                                                                                                                                                                                                                                 
-  Support of Tascam's Open TL file format         

Global Enhancements                                                                                                                                                     
                                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                   
-  New extended online Help system                                                                                                                                                                                                                                           
                                                                                                                                                                                                                                                   
-  Extensive user interface enhancements to optimize workflow and productivity                                                                                                                                                 
                                                                                                                                                                                                                                                   
-  Processor optimizations for P3, P4, Athlon XP (Windows) and Altivec (Mac)  to ensure peak performance 

Logic Control system support                                                                                                                                         
                                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                   
-  Seamless integration of the Logic Control and Logic Control XTs jointly developed with Mackie Designs                                                                                                                                                                                                                                                     
                                                                                                                                                                                                                                                   
-  Hands-on control of all important Logic Audio Functions                                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                   
-  Control the new automation system, plug-ins, audio instruments and more with both hands                                                                                                                                                                                                                                                   
                                                                                                                                                                                                                                                   
-  Expand the system with as many Logic Control XTs as needed     

 Enjoy                                   
                                                           
                               Logic  Audio  5                                       
                                                                                                   
                     your Emagic Team                                       
                                                                                                                                                                                                                                                                                                                         


19
Windows XP (Oct 2001) / BOOT.INI and ARC Path Naming Conventions
« on: January 28, 2024, 07:20:53 AM »
https://jeffpar.github.io/kbarchive/kb/102/Q102873/

guide to understanding the pathing convention for windows boot loaders
Quote
multi(X)disk(Y)rdisk(Z)partition(W) <--- looks like this

Quote
- X is the ordinal number of the adapter and should always be 0 (see the text
  below for the reason).

- Y is always 0 (zero) if the ARC path starts with MULTI(), because MULTI()
  invokes the INT 13 call as described above and therefore does not need the
  DISK() parameter information.

- Z is the ordinal for the disk on the adapter and is usually a number between
  0 and 3.

- W is the partition number. All partitions receive a number except for type 5
  (MS-DOS Extended) and type 0 (unused) partitions, with primary partitions
  being numbered first
and then logical drives.

NOTE: The first valid number for W is 1, as opposed to X, Y, and Z which start at 0 (zero).

https://neosmart.net/wiki/rebuilding-boot-ini-file/

https://web.archive.org/web/20140624094849/http://support.microsoft.com/kb/155222


21
Windows 95 through 98 and Windows NT 4.0 were the last Microsoft operating systems to officially support i486-based systems.

https://en.wikipedia.org/wiki/I486

22
just a reminder
i was wondering why i couldnt see my exfat partitions then i realized i had 10.6.3 running.. oops!

https://support-in.wd.com/app/answers/detailweb/a_id/36634/~/windows%3A-exfat-file-system-support
Quote
Mac OS X exFat support Requires Mac OS X version 10.6.6 and above

26
http://web.archive.org/web/20071113100644/http://www.cheetha.net/Kext_Helper/Software.html

file dated october 26th 2007

seems to work on 10.4.8 (jas) - i did install xcode 2.5

if you are trying to perfect your 10.4 intel hackintosh your going to want this.. unless you love typing in the terminal and doing things by hand...  theres much more better utilities available in leopard + snow leopard + above so this is only of interest to people experimenting with tiger.

27
talking about the "Enhanced Sata" legacy Bios options on motherboards from late 2000s

Quote
"Enhanced/SATA" allows you to map SATA devices to IDE, so operating systems without AHCI support can still make use of the disks. SATA+PATA usually means that SATA is mapped to primary IDE, while PATA is mapped to secondary IDE

28
OsX86 Hackintosh (Intel / AMD) / Video Cards compatible with Mac OS X
« on: December 19, 2023, 11:43:31 AM »
https://www.techpowerup.com/gpu-specs/?generation=GeForce+600&sort=generation

https://www.tonymacx86.com/threads/will-my-nvidia-graphics-card-work-with-macos-list-of-desktop-cards-with-native-support.283700/

https://dortania.github.io/GPU-Buyers-Guide/legacy-gpus/legacy-nvidia.html#geforce-8-8xxx-series

http://themacelite.wikidot.com/compatibility

Quote
Video Cards Ranked by Passmark Benchmarks
~~~~~~~~~~~~~~~~~~~~~~~
geforce 2mx >> 3
rad 9000 >> 4
geforce 4mx >> 5
Rad 8500 >> 7

geforce 6200 (NV43, Oct 2004) >> 42
radeon 9800 pro (R350, Mar 2003) >> 59
GMA 950 (Lakeport, Jun 2005) >> 109
6600 GT (NV43, Aug 2004) >> 137
6800 GT  (NV45, June 2004) >> 142
7800 GS (G70, Feb 2006) >> 177

320M (C89, Apr 2010) >> 210
HD2600 Pro (RV630, Jun 2007) >> 211 ***
GT220 (G94, Jan 2010) >> 213 ***
7600 GT (G73B, Mar 2006) >> 217

GT620 (GF108, May 2012) >> 373 ***
GT630 (GF108, May 2012) >> 681
GT730 (GK208B, Jun 2014) >> 832
8800 GT >> 494
HD 3870 >> 557
8800 GTX (G80, Nov 2006) >> 590
GT 340 (GT215, Feb 2010) >> 738
9800 GTX (G92, Mar 2008) >> 769

GTX 260 (GT200, Jun 2008) >> 1230
GTX 275 (GT200B, Jan 2009) >> 1427 ***
GTX 285 (GT200B, Dec 2008) >> 1516
*GTX 650 (GK107, Sep 2012) >> 1754 *** Kep

HD 5870 (Cypress, Sep 2009) >> 2218
*GTX 650 TI (GK106S, Oct 2012) >> 2532 Kep
HD 6970 (Cayman, Dec 2010) >> 2844
r7 260 (Bonaire, Dec 2013) >> 2892 *** X

*GTX 650-TI-BOOST(GK106, Mar2013)>>3346 Kep
GTX 750 (GM107, Feb 2014) >> 3364  X
*GTX 660 (GK106, Sep 2012) >> 3998 Kep
GTX 570 (GF110, Dec 2010) >> 3934 X

GTX 580 (GF110, Nov 2010) >> 4547 X
*GTX 670 (GK104, May 2012) >> 5316 Kep
GTX 950 (GM206, Aug 2015) >> 5342 X
*GTX 680 (GK104, Mar 2012) >> 5549  Kep
*GTX 770 (GK104, May 2013) >> 5918 Kep
*GTX 780 (GK110, May 2013) >> 8020 Kep
rx 580 (Polaris 20, Apr 2017) >> 8896
*GTX 780 TI (GK110B, Nov 2013) >> 9486 Kep
GTX 980 (GM204, Sep 2014) >> 11141 X
rx 5600 XT (Navi 10, Jan 2020)  >> 13758

29
was having a really rough time with my chrome cast... untill i played with the settings.. it somehow went from really poor signal to EXCELLENT! signal by me changing the setting for mac address to "device mac address"  literally saving me from torment as it was stutterng playback really badly before this.. strange!