*** "All things are possible" Mark 10:27 ***
please feel free to post relevant information in the pre-existing threads if file attachments or images are not displayed you may need to register/login logging in also enables you to use the arrow keys to page back + forth Recent | Who | Artists | USB | Firewire | VST | Retrospects | Commodore | ATARI ST | Amiga | IBM/DOS | WIN/PC | Mac | MacOS9 | Drums | Drum Machines | Synths | Modules | Samplers | Tape | Mixers | Software | GFX | Midi Interfaces | Midi Sequencers | ControllersE-mu | Ensoniq | Akai "S" | MPCs | Roland "MC"Roland "S" | Roland "JV" | JV addons | Hardware Effects | iOS | android | DAW Software Timeline

Post reply

Warning: this topic has not been posted in for at least 128 days.
Unless you're sure you want to reply, please consider starting a new topic.
Message icon:

(Clear Attachment)
(more attachments)
Restrictions: 48 per post, maximum individual size 64512KB
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
Steinberg's most well known product is C*B***  (6):
Digital Performer is a program made by M*T* (4):
what was opcodes main product called V***** (6):

shortcuts: hit alt+s to submit/post or alt+p to preview

Topic Summary

Posted by: chrisNova777
« on: April 24, 2015, 08:57:30 PM »

achieving sync with a digi 001 requires a midi synchronizer such as:
JL Cooper DataSync2
MOTU Digital TimePiece
Alesis BRC
Opcode Studio 64XTC

this example outlines use with the mtp av.. the procedure is similar for the other types of units:

Connect the MTP AV’s ADAT sync OUT port to the primary ADAT’s 9-pin sync IN port.
- Connect an optical cable out the ADAT into the 001 card (back of the computer).
Note: optical out has a red light emanating from it.
- Ensure the essential serial/USB connection from the MTP AV is going to the Computer.

On the MTP AV———————
MTP AV clock must be set to internal.
- Word clock out must be set to 1x.
- The MTP AV’s MMC ID must match Pro Tools.
- FreeMIDI/OMS Studio Setup
- Install OMS first
 Install FreeMIDI, Clockworks, & the MTP Express Console (www.motu.com).
Launch FreeMIDI and tell it to “use OMS” (or go to the preferences and select “OMS”).
– Launch OMS and make sure it recognizes the MTP AV as an interface.
- Branching off the MTP AV create a device and set the correct manufacturer and model.
- Choose port 9 for the connection from the MTP AV to the ADAT.
- Go in the edit menu to preferences and ensure that “serial dma” is UNchecked.
- Save, make current, and quit OMS.

Pro Tools———————
Setups menu to peripherals:
- Synchronization: Device is Generic MTC reader, Port is MTPAV,mdm
- Machine Control: Enable and send to the MTP AV, mdm ID# 127
- Windows menu: Show Session Setup. Set the sample and frame rates to match the ADAT’s. Current time and session start time should match hours. Set the sync to optical.
Note: If you do not see “current time” then the timing information is not being sent from the MTP AV (check MIDI connections, FreeMIDI/OMS setup, Pro Tools setting or the MTP AV).
When changing session start times you must press the enter key to complete the change in hour. If it prompts you to adjust the regions choose “Maintain Relative” position.
- MIDI menu: Input devices. Ensure that the ADAT and/or the MTP AV is checked.
- Transport window: Put online (Operations menu: Online). The clock will flash blue.
- Setups menu: Preferences. Choose either record at ADAT lock or Insertion/selection.
- Drop the cursor (with the waveform tool) at a location in Pro Tools and press play on the transport window.
Pro Tools should go into play mode and begin playback of the ADAT.
– Set (in the transport window) transport=MMC. The transport will now drive the ADAT.