Author Topic: socket 3 cpu  (Read 1785 times)

0 Members and 1 Guest are viewing this topic.

Offline chrisNova777

  • Administrator
  • Posts: 8576
  • Gender: Male
  • "Vintage MIDI Sequencing + Audio Production"
    • www.oldschooldaw.com | vintage audio production software + hardware info
socket 3 cpu
« on: August 27, 2015, 11:13:33 PM »
https://en.wikipedia.org/wiki/Socket_3



Quote
Socket 3 was one of the series of CPU Sockets into which various x86 microprocessors were inserted. It was sometimes found alongside a secondary socket designed for a math coprocessor chip, in this case the 487. Socket 3 resulted from Intel's creation of lower voltage microprocessors. An upgrade to Socket 2, it rearranged the pin layout and omitted one pin so that 3.3 V processors could not be plugged into older 5 V only sockets.

Socket 3 was a 237-pin low insertion force (LIF) or zero insertion force (ZIF) 19×19 pin grid array (PGA) socket suitable for the 3.3 V and 5 V,
25–50 MHz Intel 486 SX,
486 DX,
486 DX2,
486 DX4,
486 OverDrive and
Pentium OverDrive
processors
as well as AMD Am486,
Am5x86 and
Cyrix Cx5x86
processors.[1]