RME
AEB8-0 (output) & RME
AEB8-I (input) 4xSTEREO TRS Analog Expansion Boards
https://archiv.rme-audio.de/old/english/aeb/aeb48o.htmhttps://archiv.rme-audio.de/old/english/aeb/aeb48i.htmtherse also AEB4-0 + AEB4-I boards apparently. the "4" boards are mono and the "8" boards are stereo.
The AEB8-O (Analog Expansion Board) adds four analog outputs in professional quality to all ADAT capable RME cards.
The AEB8-O offers 8 outputs with
4 stereo TRS jacks. Usual insert cable can be used to split the connectors from stereo jack to mono jacks. It is also possible to drive up to 4 stereo headphones directly. Level adjustment +4 dBu/-10 dBV, 106 dBA SNR and highest suppression of PC-noise guarantee perfect sound quality.
COMPATIBILITY NOTES
Top
HDSP 9652
Two AEBx-I and two AEBx-O or two TEB can be connected and operated simultaneously, in all possible combinations. One TEB can be used together with either one AEBx-I or AEBx-O.
DIGI96 SERIES
AEBs use the internal ADAT interface of the DIGI cards. Therefore they do not work with the DIGI96 (which did not support ADAT.) To operate the AEB4-I and AEB8-I the used DIGIs must have the connectors ST6/7 on board (for the Word Clock Module.) These were not present on the very first cards of the DIGI96 series (1998 to beginning of 1999.)
One AEBx-I and one AEBx-O can be connected and operated simultaneously, in all possible combinations. Or one TEB.
HAMMERFALL DSP MULTIFACE / DIGIFACE
Multiface and Digiface use the Hammerfall DSP PCI card. This card has no internal inputs or outputs. Therefore no Expansion Boards can be used.
HAMMERFALL SERIES
An operation with the Hammerfall or Hammerfall Light requires board revision 1.5 or higher, because the internal connectors ADAT1Out, ADAT2Out and ST7 were not implemented in earlier versions.
One AEBx-I and two AEBx-O can be connected and operated simultaneously, in all possible combinations. Or one TEB and one AEBx-O.
