Author Topic: Frontier Sierra (MIDI Expansion for DAKOTA system)  (Read 2422 times)

Offline chrisNova777

  • Administrator
  • Hero Member
  • Posts: 9123
  • "Vintage MIDI Sequencing + Audio Production"
    • www.oldschooldaw.com | vintage audio production software + hardware info
Frontier Sierra (MIDI Expansion for DAKOTA system)
« on: June 23, 2017, 03:56:31 PM »
8x8 midi interface plus smpte

Quote
Sierra is an expansion box for Dakota, and must be connected to Dakota. http://www.oldschooldaw.com/forums/index.php?topic=427



https://www.frontierdesign.com/Support/FAQs/Sierra

Offline chrisNova777

  • Administrator
  • Hero Member
  • Posts: 9123
  • "Vintage MIDI Sequencing + Audio Production"
    • www.oldschooldaw.com | vintage audio production software + hardware info
Re: Frontier Sierra (MIDI Expansion for DAKOTA system)
« Reply #1 on: January 12, 2021, 06:20:40 AM »
http://frontierdesign.com/download/pdf/Dakota/Dakota_Guide.pdf
http://frontierdesign.com/download/pdf/Sierra/Sierra_Guide.pdf
http://frontierdesign.com/download/pdf/Montana/Montana_Guide.pdf

Quote
WARNING! Windows 95 is limited to a maximum of 10 MIDI
input ports and 10 MIDI output ports. Adding Sierra’s 8 MIDI
inputs and 8 MIDI outputs may put your system beyond the
limit, causing it to crash with the “blue screen” message:
 “MSGSRV32 caused a general protection fault…”
There is no easy way to recover from this crash, so before
you install Sierra, make sure you have no more than 2 other
MIDI inputs and outputs enabled in your system.