Recent | Online | Vintage | Modern | XP | Win | Mac  OS9 | DOS | Amiga | Atari ST | Graphics | Midi io | Sequencers | Roland "MC" | E-mu | Ensoniq | Akai MPCs | Samplers | Akai "S" | Roland "S" |  Synths | VST Samplers | VST Synths | Roland "JV" | Modules | Drums | Mixers | Timeline | Hackintosh |  Artists | Graphics

Welcome to Oldschooldaw.com! (Online since 2014) proudly SSL-FREE! and serving vintage computers worldwide! website is now being closed to the public. thank you for an amazing 11 years! time has move on and nothing lasts forever. i thank you to all who contributed to my project here and who knows what the future will hold. but all things change in time. nothing stays the same. https://www.youtube.com/watch?v=jvtbxtNWeaA thanks guys + good luck in the future
« previous next »
Pages: 1   Go Down

Author Topic: MIDIPlexer from Hybrid Arts  (Read 4789 times)

0 Members and 1 Guest are viewing this topic.

Offline chrisNova777

  • Underground tech support agent
  • Administrator
  • Posts: 9977
  • Gender: Male
  • "Vintage MIDI Sequencing + Audio Production"
    • www.oldschooldaw.com | vintage audio production software + hardware info
MIDIPlexer from Hybrid Arts
« on: February 08, 2019, 07:13:28 PM »
« Last Edit: February 08, 2019, 07:16:06 PM by chrisNova777 »
Logged

James Masz

  • Guest
Re: MIDIPlexer from Hybrid Arts
« Reply #1 on: June 08, 2019, 12:18:37 PM »
Just picked up one of these and managed to power it up with a standard guitar pedal 9 volt DC (fortunately matching polarity)

EditTrack Platinum recognizes it without any driver setup and it's well integrated.

My only issue with it is the SCSI cable is wired directly to the board inside the unit (and awkward), and upon initial testing, doesn't play nice with my Ultrasatan when attached via the breakout port.  (Conflicting ACSI id's?)
Logged
Pages: 1   Go Up
« previous next »